Saturday, December 4, 2010

Sound Reactive LEDs

This was a little circuit I made with the help of AcidMods. I used a 7805 Voltage Regulator to provide the 5V that will probably be used on a psp I'll sooner or later get. It's also in stereo. The circuit is a slight modification of the acidmods circuit with 1M and 100k resistors at the audio inputs. It also uses two RGB LEDs with a 10 ohm resistor connected to the blue and green and a 220 ohm resistor connected to the red. I bought off SuperBrightLEDs.com



http://www.youtube.com/watch?v=XzPLHSG0HAE&hl=en

0 Comments:

Post a Comment