LM317T Voltage Regulator with Pass Transistor

rc-creator.jimdo.com RC-Creator HobbyKing Video Transmitter Review Compatible with most 2.4Ghz video receiver systems this FPV camera and transmitter system is very versatile as well as light and very small. The camera uses a quality glass lensed SONY CCD camera system. Unlike other generic systems, we have produced a wiring loom and included it with the camera so that the Tx and camera will be compatible and on the same voltage. If you buy your camera and Tx seperately the plug polarity and voltages may be very different. Included. 1 x SONY CCD 1/3inch Camera 1 x Voltage Regulator (input 3S battery) 1 x Micro Light Weight Video Transmitter (100mW) Camera spec. CCD sensor type:1/3 color SONY CCD Pixel; NTSC: 510(H)*492(V) PAL: 500(H)*582(V) (Included) Scanning system: Interlaced scanning Synchronization: System:Inter Horizontal resolution: 420TV line Minimum Illumination 0.01LUX/F1.2 DSP+CCD: CXD3142R+405AK S/N Ratio: 48dB Gamma Modification: 0.45 White balance: Auto Auto backlight compensation: Auto Lens: 3.6MM Audio: No Input voltage: 9~12.6V Electric current 80MA Electronic Shutter: 1/50 (60) ~ 1/100000s Video output: 1.0VP-P composite video Operation Temp.: -20~50 Size: 38*38mm Flight time: Approx 60min/100mah 3S FPV Tx Spec. Power: 100mW Voltage Regulator: 3S (11.1 to 5v) Without voltage regulator: 2~6V Weight: 8g Channels: 4 Usage: 1 3S lipoly will power the camera and via the voltage regulator it will power the Tx on 5v. You will need a 2.4Ghz video receiving unit ...



http://www.youtube.com/watch?v=kdDa0siEhgQ&hl=en